Linux, FreeBSD, Juniper, Cisco / Network security articles and troubleshooting guides
https://forum.ivorde.com/

Juniper - SRX: SNMP monitoring of interface input output bytes per second
https://forum.ivorde.com/juniper-srx-snmp-monitoring-of-interface-input-output-bytes-per-second-t15581.html
Page 1 of 1

Author:  mandrei99 [ Wed Oct 16, 2013 9:45 am ]
Post subject:  Juniper - SRX: SNMP monitoring of interface input output bytes per second

How to monitor interface bps throughput in Juniper SRX branch firewall

To find the index number of the desired interface, first check the interface index table via SNMP (IF-MIB MIB file). This can be done with following command:
Code:
# snmpwalk -v2c -c public 10.11.1.2 1.3.6.1.2.1.2.2.1.2
IF-MIB::ifDescr.502 = STRING: ae0
IF-MIB::ifDescr.503 = STRING: ae0.0
IF-MIB::ifDescr.504 = STRING: ae1
IF-MIB::ifDescr.532 = STRING: ge-0/0/0
IF-MIB::ifDescr.533 = STRING: ge-0/0/1
IF-MIB::ifDescr.534 = STRING: fe-0/0/2
IF-MIB::ifDescr.535 = STRING: ge-0/0/0.0
IF-MIB::ifDescr.536 = STRING: fe-0/0/3
IF-MIB::ifDescr.537 = STRING: fe-0/0/4
IF-MIB::ifDescr.538 = STRING: fe-0/0/5
IF-MIB::ifDescr.539 = STRING: ge-0/0/1.0
IF-MIB::ifDescr.540 = STRING: fe-0/0/6
IF-MIB::ifDescr.541 = STRING: fe-0/0/7
IF-MIB::ifDescr.542 = STRING: fe-0/0/2.0
IF-MIB::ifDescr.548 = STRING: ae1.32767
IF-MIB::ifDescr.566 = STRING: ae1.8
IF-MIB::ifDescr.567 = STRING: ae1.5
IF-MIB::ifDescr.568 = STRING: ae1.2
IF-MIB::ifDescr.569 = STRING: fe-0/0/6.32767
IF-MIB::ifDescr.570 = STRING: fe-0/0/6.8
IF-MIB::ifDescr.571 = STRING: fe-0/0/6.5
IF-MIB::ifDescr.572 = STRING: fe-0/0/6.2
IF-MIB::ifDescr.573 = STRING: fe-0/0/7.32767
IF-MIB::ifDescr.574 = STRING: fe-0/0/7.8
IF-MIB::ifDescr.575 = STRING: fe-0/0/7.5
IF-MIB::ifDescr.576 = STRING: fe-0/0/7.2
IF-MIB::ifDescr.577 = STRING: fe-0/0/5.0

Above output can be retrieved also using the junos "snmp" operational command:
Code:
> show snmp mib walk decimal 1.3.6.1.2.1.2.2.1.2"
ifDescr.502   = ae0
ifDescr.503   = ae0.0
ifDescr.504   = ae1
ifDescr.532   = ge-0/0/0
ifDescr.533   = ge-0/0/1
ifDescr.534   = fe-0/0/2
ifDescr.535   = ge-0/0/0.0
ifDescr.536   = fe-0/0/3
ifDescr.537   = fe-0/0/4
ifDescr.538   = fe-0/0/5
ifDescr.539   = ge-0/0/1.0
ifDescr.540   = fe-0/0/6
ifDescr.541   = fe-0/0/7
ifDescr.542   = fe-0/0/2.0
ifDescr.548   = ae1.32767
ifDescr.566   = ae1.8
ifDescr.567   = ae1.5
ifDescr.568   = ae1.2
ifDescr.569   = fe-0/0/6.32767
ifDescr.570   = fe-0/0/6.8
ifDescr.571   = fe-0/0/6.5
ifDescr.572   = fe-0/0/6.2
ifDescr.573   = fe-0/0/7.32767
ifDescr.574   = fe-0/0/7.8
ifDescr.575   = fe-0/0/7.5
ifDescr.576   = fe-0/0/7.2
ifDescr.577   = fe-0/0/5.0

So looking at the above output, we will use interface ae1.5 - index 567 and use the JUNIPER-IF-MIB MIB file to get the IN/OUT bps rates, the " ifIn1SecRate 1.3.6.1.4.1.2636.3.3.1.1.1" and "ifOut1SecRate 1.3.6.1.4.1.2636.3.3.1.1.4" object names:

Code:
# snmpget -v2c -c public 172.16.2.2 1.3.6.1.4.1.2636.3.3.1.1.1.567 ;snmpget -v2c -c public 172.16.2.2 1.3.6.1.4.1.2636.3.3.1.1.4.567
SNMPv2-SMI::enterprises.2636.3.3.1.1.1.567 = Gauge32: 1746320
SNMPv2-SMI::enterprises.2636.3.3.1.1.4.567 = Gauge32: 1045520


References:
http://www.oidview.com/mibs/0/IF-MIB.html
http://www.oidview.com/mibs/2636/JUNIPER-IF-MIB.html
https://www.juniper.net/techpubs/en_US/ ... eting.html

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/