Linux, FreeBSD, Juniper, Cisco / Network security articles and troubleshooting guides

Register

FAQ

It is currently Fri Jun 02, 2023 3:11 am

ROOT ‹ Network Security & Routing & Switching ‹ Juniper SRX ‹ Juniper SRX: How to access/vty on the PFE from CLI

Post a reply :: Juniper SRX: How to access/vty on the PFE from CLI

Username:

Subject:

Message body:
Enter your message here, it may contain no more than 60000 characters.

Smilies

Font size:


[quote="mandrei99"]This guide shows how to jump to the VTY of the pfe on Juniper SRX branch firewalls (srx100 to srx650). The SRX branch devices have a virtual (or software) PFE. It is formed from a flowd daemon running on the routing engine unix and taking 100% cpu due to polling mode. [code] last pid: 62815; load averages: 0.12, 0.05, 0.05 up 42+06:32:33 10:36:45 58 processes: 2 running, 55 sleeping, 1 zombie CPU states: 53.1% user, 0.0% nice, 3.1% system, 0.0% interrupt, 43.7% idle Mem: 167M Active, 101M Inact, 575M Wired, 105M Cache, 112M Buf, 22M Free Swap: PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 1340 root 5 76 0 514M 58192K select 0 1126.5 95.46% flowd_octeon_hm[/code] The Junos VTY is a special interface that allows interaction with different hardware or software components in Juniper products running the Junos operating system. On the SRX, it can be used to connect to Packet forwarding engines running on SPUs, IOCs, CPP and so on. [h2]How to access/vty on the PFE from CLI on Juniper SRX branch firewalls.[/h2] [code]user@srx> start shell pfe network fwdd BSD platform (OCTEON processor, 416MB memory, 8192KB flash) FLOWD_OCTEON(srxvty)# [/code][/quote]	Font colour

Options:

BBCode is ON

[img] is ON

[flash] is OFF

[url] is ON

Smilies are ON

	Disable BBCode
	Disable smilies
	Do not automatically parse URLs

Confirmation code

Confirmation code:
In an effort to prevent automatic submissions, we require that you enter both of the words displayed into the text field underneath.

Topic review - Juniper SRX: How to access/vty on the PFE from CLI

Author

Message

mandrei99

Post subject: Juniper SRX: How to access/vty on the PFE from CLI |

Posted: Mon Jan 26, 2015 6:39 am

This guide shows how to jump to the VTY of the pfe on Juniper SRX branch firewalls (srx100 to srx650).

The SRX branch devices have a virtual (or software) PFE. It is formed from a flowd daemon running on the routing engine unix and taking 100% cpu due to polling mode.

Code:

last pid: 62815;  load averages:  0.12,  0.05,  0.05                                                                                                         up 42+06:32:33  10:36:45
58 processes:  2 running, 55 sleeping, 1 zombie
CPU states: 53.1% user,  0.0% nice,  3.1% system,  0.0% interrupt, 43.7% idle
Mem: 167M Active, 101M Inact, 575M Wired, 105M Cache, 112M Buf, 22M Free
Swap: 

  PID USERNAME   THR PRI NICE   SIZE    RES STATE  C   TIME   WCPU COMMAND
 1340 root         5  76    0   514M 58192K select 0 1126.5 95.46% flowd_octeon_hm

The Junos VTY is a special interface that allows interaction with different hardware or software components in Juniper products running the Junos operating system.

On the SRX, it can be used to connect to Packet forwarding engines running on SPUs, IOCs, CPP and so on.

How to access/vty on the PFE from CLI on Juniper SRX branch firewalls.

Code:

user@srx> start shell pfe network fwdd 

BSD platform (OCTEON processor, 416MB memory, 8192KB flash)

FLOWD_OCTEON(srxvty)#

Jump to:

Channel list

ROOT ‹ Network Security & Routing & Switching ‹ Juniper SRX

Delete all board cookies | The team | All times are UTC - 5 hours [ DST ]